Samsung sgh u700 evo, hsdpa and ubuntu hardy

My summery logons, cause movement from it accustoms them residence, over recent years to this part, has been taken advantage of Gprs/Umts modem. Till the past year celluare wave it has carried out dearly this function, however travelling to a speed of 300 k approximately and being the become undersigned somewhat impaziente (is perhaps the evolution of the technology that me it has made us to become) in forecast of the summer next luck I have decided to acquire a Samsung sgh u700 evo hsdpa, beautifulst to say true, but the foriero one of some grattacapo in the configuration and the logon.
The good old wave only needs of the formulation of the parameters vodafone (this my manager) thus:

1. launch gnome-ppp and to set up vofdafone like user and pwd, and *99 *** 1# as number of I telephone;
2. to cliccare on shapes and then on it finds, the modem comes found like /dev/ttyACM0;
3. click on you connect and we are already on Internet.

Instead to samsung this not enough. However fortune wants that excellent guide has found this indeed on the site of the Italian community of ubuntu, otherwise goodness knows how much would have had “to blink”.
I have made thus:

1. On they finishes lsusb (in order to see icodici of my telephones)
   

   002 buses Device 002: ID 062a: 0000 Creatives Labs Optical Mouse
   002 buses Device 001: ID 0000:0000
   001 buses Device 004: ID 04e8: 6601 Samsung Electronics Co., Ltd Mobile Z100 Phone
   001 buses Device 001: ID 0000:0000

2. gksudo gedit /etc/modules, within the rows to insert usbserial;
3. gksudo gedit /etc/modprobe.d/options, within inserting options usbserial vendor=0×04e8 product=0×6601 (04e8 and 6601 is the codes rispetivamente of the samsung and of the model of I telephone);
4. gksudo gedit /etc/modprobe.d/blacklist, to insert blacklist cdc_acm (in order to avoid the loading of the module of default).
5. after to have riavviato launch gnome-ppp and to repeat points 1 and 2 of the configuration “wave” (this time the modem will come found on /dev/ttyUSB0);
6. to cliccare on strings of initialization in the card formulations and to editare init2 inserting this line: AT CGDCONT=1,” IP”,” web.omnitel.it”, 0,0;
7. at last on Options dulls to remove it to Controls carrier linens.

I leave to imagine the satisfaction you of the HSDPA. It was a flat would be better than to house!

It marks it near: